1. Be prepared for a fight, for a real TEST of your abilities
Do not go in expecting to have a good time. If it is a TEST, you will not have a good time. If it is an easy paper it means most people are killing it.

2. If it is tough for you it is tough for everyone else
On test day your ability is not going to change dramatically. Neither are you going to solve questions that have always been out of your league and you are not going to miss straightforward questions.
  So if you are looking at the questions and find that there are fewer questions than usual that you find solvable then it means that is a tough test. The usual solvable number changes from student to student. On Quant for one person it can be 25 for another it can be 20 and for yet another, it can 15.
   If the test is tough, this number will come down for everyone. It goes without saying that the reverse occurs if the test is easy. In both cases the task is the same, squeeze out every run you can from that pitch.

3. Remember, unfamiliar does not mean unsolvable!
How many times have you left a DI Set just because it is unfamiliar looking only to discover later that it was actually quite simple? I am sure quite often.

We are wired to be wary of the unfamiliar, it helps us survive. But on aptitude tests, this can be your undoing. Very often DI Sets where the representation is not a regular one or LR sets which do not seem to be the standard arrangement types might not be difficult to solve once you invest 3-4 minutes trying to understand what they mean.

In fact, the converse is also true, familiar-looking sets can lull you into investing time into solving them only to realize much later that they should have been left alone.

4. No Question Is Worth More Than 3 Minutes

Do not throw good money after bad money. Do not restart solving a question after you have already spent 4 minutes on it. You might think you can get 3 marks if you spend another 3 minutes but there are always plenty more fish in the sea, especially easier ones. Remember all those SimCAT questions you discovered you could easily solve only after you went home.

If I can’t solve a Numbers question who will? Do Not Let Your Favourite area or topic Jeopardise Your Test.No question, not even ones from your favorite areas, are worth it.

5. Time-Limits Are Sacrosanct, Do Not Exceed Them

The most precious thing on an aptitude test is time. So if you have set some basic time-limits for yourself, VA-RC 20-40 or DI-LR 30-30 then you should stick to them. Even an extra 5 minutes here and there can jeopardize your sectional cut-offs and hamper your chances of getting a call.

For example, I would rather do two/three solvable LR Sets in 15-20 minutes and leave the seemingly tougher one after trying for 3-5 minutes rather than spend 35-40 mins trying to solve all the LRs. Always exit when your prescribed time-limit for an area is done. There might easy DI sets waiting for you!

IIMs take sectional cut-offs very seriously, right down to the decimal. Remember it is a computer that will generate the list of candidates to be sent the first call based on the input parameters and not people sitting and evaluating your application qualitatively. So a 79.9 instead of 80 on a section will mean that you will not get the first call.

If you feel you need to give 10 minutes more to an area, do that later not immediately. We have discussed how you need to allocate your time in this post.

6. Skip questions within a set in DI and LR

Within a particular DI or LR set (more DI than LR), there will be one question that might end-up being time-consuming. This can be the first one or the second one. So first estimate the number of steps involved in solving a question or the precision of calculation required (close options), if both are high then quickly move on to the next question. In many cases, it does turn out that solving two questions of a set in 4 minutes is a much better option than getting stuck for 10-15 minutes with 3-4 questions.

7. The last 15 minutes of every section is most crucial

As the clock winds down on a section we start moving frantically from question to question. This period is usually the make or break period. We usually get greedy and frantically switch between questions hoping to make some quick marks!

How many questions can you realistically solve in 15 minutes if you have already solved the easy and medium questions? Not more than 5 questions.

So stop taking random shots at all unsolved questions.

VA-RC: If you have marked questions for later, go to those questions first and decide what to do. Once you are through with them, attempt other questions. If you have 2 RCs left, then realistically you can solve one properly. So choose that one and give it a good shot.

DI-LR: If there are eight sets of 4 questions each and you have solved 4 of them in the 45 minutes, you will have 4 of them left with 15 minutes to go.

Even if you want to pick out as many easy and medium questions from the remaining sets how many sets can you attempt?

Can you expect a set to yield itself to you without any brain-work? To quote a line from 3 Idiots, no set is going to say — Tohfa Kabool Karo Jahanpana

So if you had classified the sets as per their difficulty level, it is best to choose the two easiest sets to solve among the ones left and leave two sets instead of spending 5 minutes on each set.

QA: The MARK button is most important for this section. The last 15 minutes are going to be the last 15 minutes of the test and hence a greater chance of becoming frantic.

If you had used the MARK button to single out questions that you feel you can do but will have taken time in the first round, your last 15 minutes will end up being productive. Almost everything that we discussed above applies most to this section.

Remember, in the slog overs, the batsmen who walk around the crease a lot just to scare the bowler are rarely successful. It is guys who keep their head still and execute who succeed.

8. Do not let your performance on one section jeopardize your performance on another section

Okay so one section, VA-RC or DI-LR did not go as per the plan. Does that mean you decide this test is over?

You are not the best judge of how well or how badly you have done. Let us say you performed below par in DI-LR and this means that from a potential 95 percentile you will come down to 90 percentile. This is possible only if you perform up to par in QA! If you take a negative mindset into QA, instead of a 90 you might end up with an 85 percentile! You know how bad that can be.

We have seen this too many times over the years.

I usually do not quote Sehwag as an example to be followed but in this case, you should follow the Sehwag model — he is least bothered about the previous ball, he always plays every ball afresh with a carefree attitude (carefree does not mean careless)

Do not let your performance in the previous section or question affect you, every ball is a new ball, every question is a new question, every section is a new section


Share on facebook
Share on twitter
Share on pinterest
Share on linkedin

Related Posts

Admission process for BBA through CUCET

Admission process for BBA through CUCET

The CUET exam also known as The Central University Common Entrance Test is a common entrance test that is conducted by NTA for UG Admissions to the Central Universities in India. A total of 54 Universities take admission based on the CUET score. Some important details of the CUET are:   Particulars  Details  Exam Name 

Read More »
Delhi University Entrance Test (DUET) BBA - Details

Delhi University Entrance Test (DUET) BBA – Details

Delhi University Entrance Test for BBA is conducted by the National Testing Agency (NTA). A total of 16 colleges accept the DUET score. It is an online-based entrance test.  Eligibility criteria for DUET for BBA – The candidate must have a 10+2 passing certificate from the Delhi University education board with a minimum of 60%

Read More »
IPMAT Rohtak Admission Process Details

IPMAT Rohtak Admission Process Details

Integrated Program in Management at Rohtak is a 5-year degree course where 3 years is to build the managerial study background. The last two years are for the management in post-graduation. The students are awarded the IPM degree by IPM  IIM Rohtak.  Eligibility criteria for the IPMAT Rohtak exam: The candidate must have a minimum

Read More »
Scroll to Top
Connect via WhatsApp/Call or Fill in below form

Entrance Exam Updates

MBA Entrance Exam Updates

Law Entrance Exam Updates

BBA Entrance Exam Updates